Ponding & filtering BMP alternative to super silt fence.
Rigid material of Siltron requires no chain linked fencing for reinforcement for preventing soil erosion.
Can be installed at a rate of 375 linear feet per hour.
Relatively nothing can tear this fabric, preventing common headaches related to traditional silt fence. We dare you to try.
Acts as a dynamic filter-ponder; Siltron stands strong during dynamically changing stormwater intensity and prevents water erosion.
Siltron® geotextile compresses but de-compresses as pressure alleviates. When a blinding slurry builds up, the compressed textile snaps back (about .5mm).
Pre-staked bundles are available in 50 ft intervals perfect for trenching; master rolls are available in 100 ft intervals for static slicing machines.
Absorbs viscous pollutants in stormwater such as motor oil, hydraulic fluid, diesel, etc., while stopping water erosion.
Siltron UV resistance numbers are much better than traditional silt fencing.
Sediment shall be removed when accumulations reach half the above ground height of the fence.
Any section of fence which has been compromised through physical damage or is blinded with sediment or hydrocarbons shall be immediately replaced either a rock filter outlet configuration, or filter sock (compost or switchgrass).
If undercutting occurs, fill must be added to trench and area re-compacted.
Fence shall be removed and properly disposed of when tributary area is permanently stabilized.
Contact us to place an order for our Erosion and Sediment Control products.
Our Resources page has full documentation on all of our Oil Spill and Erosion & Sediment Control products.